Merhabalar esp8266 ya arduino ide ile iletişim kurup istediğim kodları gönderiyorum. Webserver kodlarını gönderdiğimde seri port ekranında wifi connected ve server started bilgilendirmesi ve esp nin ip si geliyor. Fakat esp nin ip sine chrome üzerinden bağlanmaya çalıştığımda bağlantı etkin olarak redediliyor. Esp nin enerjisini kesip o şekilde ip ye bağlanmaya çalışınca bir süre bekledikten sonra zaman aşımı hatası alıyorum. Burdan esp nin etkin olarak redettiğini saptadım. Kodlarım şu şekilde:
#include <ESP8266WiFi.h>
const char* ssid = "your-ssid";
const char* password = "your-password";
// Create an instance of the server
// specify the port to listen on as an argument
WiFiServer server(80);
void setup() {
Serial.begin(115200);
delay(10);
// prepare GPIO2
pinMode(2, OUTPUT);
digitalWrite(2, 0);
// Connect to WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
// Start the server
server.begin();
Serial.println("Server started");
// Print the IP address
Serial.println(WiFi.localIP());
}
void loop() {
// Check if a client has connected
WiFiClient client = server.available();
if (!client) {
return;
}
// Wait until the client sends some data
Serial.println("new client");
while(!client.available()){
delay(1);
}
// Read the first line of the request
String req = client.readStringUntil('\r');
Serial.println(req);
client.flush();
// Match the request
int val;
if (req.indexOf("/gpio/0") != -1)
val = 0;
else if (req.indexOf("/gpio/1") != -1)
val = 1;
else {
Serial.println("invalid request");
client.stop();
return;
}
// Set GPIO2 according to the request
digitalWrite(2, val);
client.flush();
// Prepare the response
String s = "HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n<!DOCTYPE HTML>\r\n<html>\r\nGPIO is now ";
s += (val)?"high":"low";
s += "</html>\n";
// Send the response to the client
client.print(s);
delay(1);
Serial.println("Client disonnected");
Herhangi bir yerde yanlışlık mı yapıyorum yada eksik bir yer varsa yazarsanız çok sevinirim.