S.a. arkadaşlar,
İlgili entegrenin datashet'inde işime yarayan devreler var. Ben MC34063A entegresi ile 12 volt dc'yi 24 volt dc'ye yükseltmek istiyorum ancak;
(http://www.yukleresim.com/images/47582374914662633215.jpg)
Bu devreyi birebir uygulayacağım. Çıkış akımı yetersiz 175 mA. İkinci bir devre ile bu çıkış 1.5 A'ya çıkartılabiliyormuş.
(http://www.yukleresim.com/images/14270723886535930834.jpg)
Benim anlamadığım nokta ise, Şemanın altında şöyle bir açıklama var.
Figure 9. External Current Boost Connections for IC Peak Greater than 1.5 A
9a. External NPN Switch
8. If the output switch is driven into hard saturation (non−Darlington configuration) at low switch currents (≤ 300 mA) and high driver currents
(≥ 30 mA), it may take up to 2.0 s to come out of saturation. This condition will shorten the off time at frequencies ≥ 30 kHz, and is magnified
at high temperatures. This condition does not occur with a Darlington configuration, since the output switch cannot saturate. If a
non−Darlington configuration is used, the following output drive condition is recommended.
Bu devre hakkında yardımcı olabilecek arkadaşlara şimdiden teşekkür ederim.