Picproje Elektronik Sitesi

/* 
 * File:   main.c
 * 
 * Author: Baran EKREM
 * 
 * Created on 22 Mayıs 2015 Cuma, 00:51
 */
#include "main.h"

int main(void) {

    PORTB = 0xFF;
    
    while (1) {
        
    }
    return 0;
}

/* 
 * File:   main.h
 * 
 * Author: Baran
 *
 * Created on 22 Mayıs 2015 Cuma, 00:58
 */
#ifndef MAIN_H
#define	MAIN_H

#include <stdio.h>
#include <stdlib.h>
#include <xc.h>
#include <pic16f1826.h>

#pragma config FOSC = INTOSC    // Oscillator Selection (INTOSC oscillator: I/O function on CLKIN pin)
#pragma config WDTE = OFF       // Watchdog Timer Enable (WDT disabled)
#pragma config PWRTE = OFF      // Power-up Timer Enable (PWRT disabled)
#pragma config MCLRE = OFF      // MCLR Pin Function Select (MCLR/VPP pin function is digital input)
#pragma config CP = OFF         // Flash Program Memory Code Protection (Program memory code protection is disabled)
#pragma config CPD = OFF        // Data Memory Code Protection (Data memory code protection is disabled)
#pragma config BOREN = OFF      // Brown-out Reset Enable (Brown-out Reset disabled)
#pragma config CLKOUTEN = OFF   // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin)
#pragma config IESO = OFF       // Internal/External Switchover (Internal/External Switchover mode is disabled)
#pragma config FCMEN = OFF      // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled)

// CONFIG2
#pragma config WRT = OFF        // Flash Memory Self-Write Protection (Write protection off)
#pragma config PLLEN = ON       // PLL Enable (4x PLL enabled)
#pragma config STVREN = OFF     // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will not cause a Reset)
#pragma config BORV = LO        // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), low trip point selected.)
#pragma config LVP = OFF        // Low-Voltage Programming Enable (High-voltage on MCLR/VPP must be used for programming)

#endif	/* MAIN_H */

#define _XTAL_FREQ 32000000

OSCCON=0b01110010;